Vanguard DMOM-100_200 s2 - Manual (Page 32)

DMOM-100/200 Series 2 Operating Procedures
32
Rev 2, 2009
Table 8.0 Review Record Procedure (continued)
STEP ACTION DMOM DISPLAY
8-5 The “number of tests” display also shows the
date and the time. Scroll through the test
record (using the
∧ and ∨ keys to scroll).
When the test record of interest appears,
press the ENTER key to select it.
8-6 Pressing the ENTER key (from step 8-5)
will list all test data, including test number,
test current, burn-in time, and the measured
resistance value.
NOTE
The test record in this example contains 2
tests.
8-7 Press the
∧ key to view to the next test. Press
the
∨ key to return to the previous test.
Press the STOP key to return to the START
MENU.
This completes the Review Record Procedure.
TEST NUMBER: 1
TEST CURRENT: 100A
BURN - IN TIME: 5 Sec
500.3 MICRO-OHMS
TEST NUMBER: 2
TEST CURRENT: 50A
BURN - IN TIME: 5 Sec
500.1 MICRO-OHMS
2 TESTS
12/11/08 17:27:00