Vanguard DMOM-100_200 s2 - Manual (Page 33)

DMOM-100/200 Series 2 Operating Procedures
33
Rev 2, 2009
7.10 Restoring a Record
This procedure describes the steps to recall a test record stored in the DMOM’s Flash memory.
Table 9.0 Restore Record Procedures
STEP ACTION DMOM DISPLAY
9-1 On the START MENU, press key # 2
(SETUP) to display the SETUP MENU.
9-2 On the SETUP MENU, press key # 3
(RESTORE RECORD) to display a menu
of options (RESTORE RECORD,
DIRECTORY, ERASE RECORD).
9-3 Press key # 1 (RESTORE RECORD) to
display a menu of restore records options.
Option # 1 allows a user to restore a record
when the record’s number is known.
Option # 2 allows the user to scroll through
the stored records to select the correct one.
To use Option # 2, go to step 9-7.
9-4 OPTION 1:
Press key # 1 (ENTER RECORD
NUMBER) to display a prompt to enter the
record number to restore.
9-5 Enter the desired record number, then press
the ENTER key to restore the record.
The RECORD RESTORED screen will
appear. Press the ENTER key to continue.
.
9-6 The REVIEW RECORD menu will
appear. View or print the record by
pressing the # 1 or # 2 key, or return to the
START menu by pressing the STOP key.
9-7 OPTION 2:
Press key # 2 (SCROLL TO SELECT) in
the RESTORE RECORD menu (step 9-3)
to display the RECORDS DIRECTORY.
9-8 In the RECORDS DIRECTORY, use the
∧ and ∨ keys to scroll through the directory
listings of test records. When the desired
test record is displayed, press the ENTER
key to restore the test record.
1. ENTER ID
2. REVIEW RECORD
3. RESTORE RECORD
4. NEXT PAGE
1. RESTORE RECORD
2. DIRECTORY
3. ERASE RECORD
RESTORE RECORD
1. ENTER RECORD NUMBER
2. SCROLL TO SELECT
RESTORE RECORD
NUMBER:
RECORD RESTORED!
RECORDS DIRECTORY
“UP TO SCROLL FWD
“DWN” TO SCROLL RVS
#1 12/11/08 17:27:00
REVIEW RECORD
1. SCROLL TEST RECORD
2. PRINT TEST RECORD