Vanguard DMOM-100_200 s2 - Manual (Page 30)

DMOM-100/200 Series 2 Operating Procedures
30
Rev 2, 2009
Table 7.0 Enter Record ID Procedure (continued)
STEP ACTION DMOM DISPLAY
7-7 Enter the test item’s MODEL using the
alphanumeric keypad. Press the ENTER key
to load the entered characters and advance to
the SERIAL NUMBER input screen.
7-8 Enter the test item’s SERIAL NUMBER
using the alphanumeric keypad. Press the
ENTER key to load the entered characters
and advance to the KVA RATING input
screen.
7-9 Enter the test item’s KVA RATING using
the alphanumeric keypad. Press the ENTER
key to load the entered characters and
advance to the OPERATOR input screen.
7-10 Enter the test OPERATOR name, using the
alphanumeric keypad. Press the ENTER key
to load the entered characters and return to
the START MENU display (shown at right).
This completes the ENTER TEST RECORD ID procedure.
SERIAL NUMBER:
KVA RATING:
OPERATOR:
1. RUN TEST 12/11/08
2. SETUP 12:26:01
3. CAL CHECK