TREND IQ3 User Guide - Manual (Page 37)

IQ3 Web User Guide TC200631 Issue 2, 02/02/2009 37
Using IQ3 from a Web browser
4.11 View Module Detail Pages
The parameters of individual modules can be displayed on Module detail Pages.
to view Module detail Pages:
View the 1. Module list Page for the required module type as described in the ‘ View Module list Pages ’
section of this manual.
Click the module number. A new window containing all of the module’s parameters is displayed. 2.
Or
Click the module when it is displayed as a line ( 1. underlined). A new window containing all of the module’s
parameters is displayed.
Note that the parameters on the page are dependent on your authority level. This ensures that the information you
see is what is required.
The values of the parameters can be changed by entering the new value in the box and clicking
You can go directly to a module that is a destination or source of the current module by selecting the required module
in the list next to source or destination parameter and clicking to goto the destination module, or to goto the
source module. The display shown below will be displayed.
Clicking next will display the parameters for next module, and clicking Prev will display the parameters for the
previous module.
4.12 Goto the associated Module
You can go directly to a module that is a source to, or destination of the current module. This enables you to move
easily through the strategy .
to goto the associated module:
From the list next to the 1. source or destination column click the required source/destination.
Click 2. to goto the destination, or to goto the source module.