TREND IQ3 User Guide - Manual (Page 19)

IQ3 Web User Guide TC200631 Issue 2, 02/02/2009 19
Using IQ3 from a Web browser
4.1.3 log out
Once use of the IQ3 controller is finished, it is advisable to log out to prevent unauthorised changes being made.
to log out:
Click 1. logout.
Close the browser. 2.
Note that if left unattended for a period of time the controller may automatically log the current user out if it has
been configured in this way.
4.1.4 refresh the Display
The data displayed can be refreshed to ensure that it is up-to-date.
to refresh the display:
Click 1. .
4.2 add a User
If required users can be added to prevent unauthorised changes.
to add a user:
Connect to the IQ3 controller as described in the ‘ 1. Connect to the iQ3 Controller ’ section of this manual.
Note that you must login as a use with a password level of at least 99.
Click 2. Modules.
Click 3. users.
Click 4. Create new user. The display shown below is displayed.
In the 5. user name box enter the required user name. This is a 30-character name used when logging in from
a web browser.