TREND IQ3 User Guide User Manual
Page 12
12
IQ3 Web User Guide TC200631 Issue 2, 02/02/2009
IQ3 Pages
3.3
Modules Page
(continued)
The list contains all the instances (10 on a page) of that module type in the strategy. The information displayed varies
slightly depending on the module type. An example of the type of information displayed is described below.
Item (e.g. module D1)
Label
Value
Status
Alarm condition (e.g. Readback)
Clicking the module reference in the item column will take you straight to
In the case of adjustment modules (i.e. knobs and switches), the value/status can be changed, and of sensor and plot
modules can be graphed. Modules that have a current alarm condition associated with them are displayed in red.
Clicking
displays a
.
If time zones have been selected the list provides a list of all the time zones together with the label, the current
occupation state (O=unoccupied, I=occupied), and links to the normal week and exceptions.
Selecting the normal week enables the normal occupation times for each day of the week to be set up. If required the
times can be copied from one to the other. Additional occupation periods can be added to a day.
Buttons at the bottom of the list enable navigation to other modules of the same type.
Button
Description
First 10 modules
Next 10 modules
Previous 10 modules
Last 10 modules