TREND IQ3 User Guide - Manual (Page 21)

IQ3 Web User Guide TC200631 Issue 2, 02/02/2009 21
Using IQ3 from a Web browser
View occupation Times 4.3
Information about the normal weekly occupation times any exceptions to those occupation times can be viewed:
View normal occupation times
View exceptions
Selecting the normal week enables the normal occupation times for each day of the week to be set up. If required
the times can be copied from one to the other. Additional occupation periods can be added to a day. Selecting the
exceptions enables exceptions to standard working to be set up. Clicking the module in the ‘Zone’ column will take
you straight to module details page for the zone.
4.3.1 View normal occupation Times
The normal occupation times specify the occupation times that will be used for each day unless there is an
exception.
to view the normal occupation times:
Connect to the IQ3 Controller as described in the ‘ 1. Connect to the iQ3 Controller ’ section of this manual.
Click 2. time Zones. If the required time zone is not displayed use the buttons to navigate to
the required time zone.
Click 3. normal Week. A display similar to the one shown below appears in a different window.
This display indicates the occupation times for each day of the week. To view details of the occupation times
for a particular day click the required day.