TREND IQ3 User Guide - Manual (Page 30)

30 IQ3 Web User Guide TC200631 Issue 2, 02/02/2009
Using IQ3 from a Web browser
4.4.3 adjust Module Parameters
The values of a module’s configuration parameters can be adjusted providing you have the appropriate level of
authority.
To adjust a module’s configuration parameters:
Connect to the IQ3 controller as described in the ‘ 1. Connect to the iQ3 Controller ’ section of this manual.
If you have a user name and password for the controller you should click 2. login to login now to ensure the
controller presents you with information that is relevant to you as described in the ‘ login ’ section of this
manual. This may cause the controller to display a different page.
Navigate to the 3. module details page for the module for which the configuration parameters are to be
adjusted.
In the box next to the parameter that is to be adjusted in the 4. Value column enter the new value for each of the
module parameters that are to be adjusted.
Once all the required values have been made click 5. .
Note that only the module’s parameters can be changed; changes to the strategy structure (i.e. module interconnections,
and creation/deletion of modules) are not allowed.