beautypg.com

Power supply – Staub Electronics B-500-RX-230-IR BINARY - HD BASE T RECEIVER WITH BI-DIRECTIONAL IR FOR B-500 HDBASET MATRIX SWITCHERS User Manual

Page 7

background image

pg.7

www.snapav.com Support: 866.838.5052

B-500-RX-230-IR Installation Manual

5.2. HDMI Cable

• Use Binary (or similar) 2 meter or shorter, High Speed rated HDMI cables between any device and

the HDMI output port of the Receiver for the best performance.

• The Receiver should work with a longer cable, but in the case of any picture or sync issues, it

should be 2 meters or less between the equipment and the Receiver to accurately troubleshoot.

• Avoid using HDMI keystones. The best practice for HDMI cables is to have one unbroken cable

between the Receiver and other equipment.

6. Power Supply

The B-500-RX-230-IR uses a 5V DC 2A power supply.

Power Supply Voltage Warning! Before applying power to the Receiver, read the label on the power
supply to confirm that it is 5V DC 2A. Connecting the wrong voltage power supply may cause damage to
the Receiver or the supply.