beautypg.com

Staub Electronics B-500-RX-230-IR BINARY - HD BASE T RECEIVER WITH BI-DIRECTIONAL IR FOR B-500 HDBASET MATRIX SWITCHERS User Manual

Page 5

background image

pg.5

www.snapav.com Support: 866.838.5052

B-500-RX-230-IR Installation Manual

4. Receiver Layout

1. HDMI Out

Attach HDMI cable to the display.

2. IR Receiver

Connect an IR receiver to this port for capturing commands to transmit IR signal to the matrix
switcher using IR pass-through. (3.5mm stereo mini)

3. IR Flasher

Connect an IR flasher or control system to this port to control a display or device using IR
pass-through. (3.5mm mono mini)

4. Latch-Locking Power Jack

Attach the included 5V DC 2A power supply to this jack.

5. Firmware Update Port (USB)

Factory use only. Requires custom non-standard USB cable.

6. HDBaseT Link Port (RJ45)

Attach the HDBaseT cable from the transmitting device.

7. Power LED

Illuminates solid RED when extender is powered on.

8. Link LED

Illuminates solid GREEN when HDBaseT Link is active. Off indicates that HDBaseT Link is
not active.

7

1

2

3

4

5

6

8