LevelOne IES-1085 - Manual (Page 67)

User Manual Page 67
This key must match the encryption used on the radius daemon. All leading spaces are
ignored, but spaces within and at the end of the key are used. If spaces are used in the
key, do not enclose the key in quotation marks unless the quotation marks themselves
are part of the key.
5. Timeout <1-1000>: Timeout textbox and specify the time interval (in
seconds) that the Switch waits for the radius server to reply before retransmitting.
Enter a value in the range 1 to 1000.
6. Retransmit <1-100>: Retransmit textbox and specify the number of times
a radius request is resent to a server if that server is not responding or responding
slowly. Enter a value in the range 1 to 100.
7. Submit: C Submit button when you finished Radius Server Setting.
Delete Radius:
1. Delete Radius: C
Delete Radius button. The Select Radius Server IP window
appears.
2. Select Radius Server IP: C Select Radius Server IP drop-down menu from Select
Radius Server IP drop-down list to choose the IP address of the remote radius server
host to be deleted.
3. Submit: C Submit button when you finished radius server deletion.