LevelOne IES-1085 - Manual (Page 50)

User Manual Page 50
RSTP Port Setting
1. STP Version: C STP Version drop-down menu to choose RSTP from STP Version
drop-down list.
2. Port: C Port drop-down menu to Choose Port 1 ~ Port 12 from Port drop-down
list.
3. Priority(Granularity 16): C Priority enter a value between 0 and 240
to set the priority for the port. A higher priority will designate the port to forward
packets first. A lower number denotes a higher priority. This entry must be divisible by
16. The default priority setting is 128.
4. Admin. Path Cost: C Admin. Path Cost enter a value between 0 and
2000000 to set the Admin. Path Cost for the port. 0 (auto) - Setting 0 for the Admin.
Path Cost will automatically set the speed for forwarding packets to the port for
optimal efficiency. Default port cost: 100Mbps port = 200000. Gigabit port = 20000.
5. Point to Point Link: C Point to Point Link drop-down menu to Choose Enable or
Disable from Point to Point Link drop-down list to enable or disable Point to Point
Link for the port.
6. Edge Port: C Edge Port drop-down menu to Choose Enable , Disable , or Auto
from Edge Port drop-down list to set Enable, Disable, or Auto Edge Port for the port.
7. Update setting: C Update setting button when you finished RSTP Port Setting.