LevelOne IES-1085 - Manual (Page 150)

User Manual Page 150
2. Usage:
Use ip igmp snooping report-suppression command to enable report suppression for
IGMP versions 1 and 2.
Use the no ip igmp snooping report-suppression command to disable report
suppression.
3. Command Syntax:
(no) ip igmp snooping report-suppression
4. Example:
The following example enables report suppression for IGMPv2 reports on vlan1.1:
switch_a(config)#interface vlan1.1
switch_a(config-if )#ip igmp version 2
switch_a(config-if )#ip igmp snooping report-suppression
switch_a(config-if )#
NTP
Adjust RTC Time:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The switch_a(config)# prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to specify system time to Switch.
3. Command Syntax:
rtc adjust-system-time YEAR MONTH DAY HOUR MINUTE SECOND
YEAR <0-99> specifies year 2000 ~ 2099 to Switch.
MONTH <1-12> specifies January ~ December to Switch.
DAY <1-31> specifies day to Switch.
HOUR <0-23> specifies hour to Switch.
MINUTE <0-59> specifies minute to Switch.
SECOND <0-59> specifies second to Switch.
4. Example:
The following example adjusts system time to Switch:
switch_a(config)#rtc adjust-system-time 2009 1 1 0 14 4
switch_a(config)#
NTP Status:
5. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).