LevelOne IES-1085 - Manual (Page 54)

User Manual Page 54
MSTP Port Setting
Port Instance Configuration
1. Instance ID: C
Instance ID drop-down menu to choose instance ID from Instance
ID drop-down list.
2. Click Port 1 ~ Port 12 to assign ports to the corresponding instance ID.
3. Update setting: C
Update setting button when you finished Port Instance
Configuration.
Instance ID
1. Instance ID: C
Instance ID drop-down menu to choose instance ID from Instance
ID drop-down list.
MSTP Port Configuration
1. Port: C
Port drop-down menu to choose port from Port drop-down list.
2. Priority(Granularity 16): C Priority to set the port priority for a bridge
group. The Multiple Spanning Tree Protocol uses port priority as a tiebreaker to
determine which port should forward frames for a particular instance on a LAN, or
which port should be the root port for an instance. A lower value implies a better
priority. In the case of the same priority, the interface index will serve as the tiebreaker,
with the lower-numbered interface being preferred over others. The permitted range
is 0-240. The priority values can only be set in increments of 16.
3. Admin. Path Cost: C Admin. Path Cost to set the cost of a path
associated with an interface.
4. Update setting: C Update setting button when you finished MSTP Port Setting.