LevelOne IES-1085 - Manual (Page 11)

User Manual Page 11
Product Highlights
Basic Features

Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and
vibration for traffic control equipment.

Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial
environment.

RS-232 console, Telnet, SNMP v1 & v2c & v3, RMON, Web Browser, and TFTP
management.

Supports Command Line Interface in RS-232 console.

Supports 8192 MAC addresses. Provides 2M bits memory buffer.

Port 1 ~ Port 4 support IEEE802.3at Power over Ethernet (PoE) Power Sourcing
Equipment (PSE) and/or Port 5 ~ Port 8 support IEEE802.3af Power over Ethernet (PoE)
Power Sourcing Equipment (PSE).

Supports IEEE802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation,
1000Mbps-full-duplex, 10/100Mbps-full/half-duplex, Auto MDI/MDIX.

100Base-FX: Multi mode or Single mode duplex LC type. 100Base-BX: WDM Multi mode
or Single mode single LC type.

1000Base-SX/LX: Multi mode or Single mode duplex LC type. 1000Base-BX: WDM Multi
mode or Single mode single LC type.

Store-and-forward mechanism. Full wire-speed forwarding rate.

Alarms for power and port link failure by relay output.

Power Supply: Redundant 47-57VDC Terminal Block power inputs or 47-57VDC DC Jack
power input.

Field Wiring Terminal: Use Copper Conductors Only, 60/75℃, 12-24 AWG torque value 7
lb-in.

Operating voltage and Max. current consumption: 0.31A @ 48VDC. Power
consumption: Power consumption: 230W Max. (Full load with PoE), 15W Max. (Without
PoE).

-40℃ to 75℃ (-40℉ to 167℉) operating temperature range. Tested for functional
operation @ -40℃ to 85℃ (-40℉ to 185℉). UL508 Industrial Control Equipment
certified Maximum Surrounding Air Temperature @ 75℃ (167℉).

For use in Pollution Degree 2 Environment.

Industrial metal case.

Supports Din-Rail or Panel Mounting installation.
Management Support
VLAN
 Port-based VLAN
 IEEE802.1Q tagged VLAN