Gilderfluke&Co BR-SmartMedia - Manual (Page 84)

Eight Bit Resolution: Analogs at 0, 1, 2, 3, 4, 5. Digital control word at 6
Twelve Bit Resolution: Analogs at 1, 2, 4, 5, 7, 8. Digital control word at 9
Sixteen Bit Resolution: Analogs at 0, 2, 4, 6, 8, 10. Digital control word at 12
l) String Trigger Channel: Please refer to the MIDI section of this
manual.
m) Edit Strings.....: Please refer to the MIDI section of this manual.
w) Oversampling: This is a Moog Mode specific command. The
Moog Motion bases must be updated through their serial ports at
sixty times per second. Animation systems typically are updated at
thirty times per second. Normally the same data is sent to the
Motion Base twice on each frame. When this toggle is ON, the BR-
SmartMedia will interpolate the incoming data from thirty frames
per second to sixty frames per second for the Moog Motion Base.
This makes for a much smoother ride, and there is no reason to
ever turn this off if you are running a Moog motion Base.
g) Analogs to Ease-In: Please refer to the MultiShow section of this
manual.
i) Info: Please refer to the MultiShow section of this manual.
o) Reload Configuration: Please refer to the MultiShow section of
this manual.
p) Play a Show: Please refer to the MultiShow section of this manual.
r) Save Configuration: Please refer to the MultiShow section of this
manual.
t) Test Shows: Please refer to the MultiShow section of this manual.
x) eXit: Please refer to the MultiShow section of this manual.
G
ILDERFLUKE
& C
O
.• 205 S
OUTH
F
LOWER
S
TREET
• B
URBANK
, C
ALIFORNIA
91502 • 818/840-9484 • 800/776-5972 •
FAX
818/840-9485
E
AST
C
OAST
/F
LORIDA
O
FFICE
• 7041 G
RAND
N
ATIONAL
D
RIVE
• S
UITE
128d • O
RLANDO
, F
L
. 32819 • 407/354-5954 •
FAX
407/354-5955
76 of 81