Br-smartmedia in intelix mode, 59 of 81 – Gilderfluke&Co BR-SmartMedia User Manual
Page 67

BR-SmartMedia in Intelix Mode
For a BR-SmartMedia in Intelix mode, the menu will appear as follows. At
the top of the screen the size of the AutoDownload file found on the
SmartMedia Flash Card (if any) is shown. If the AutoDownload file isn't
found, then 'not found' will appear in this space
-Gilderfluke & Company - BR-SmartMedia in BR-Serial Mode - v1.22 - [c]2003 DCM-
__9 shows with 232 channels @ __0 Offset / Set FileName is CROOM1__.A00
Card Address- __0
a) DMX- Tx & Rx w/CS
b) baud rate- 38.4 KBaud
c) numbering system- decimal
d) VT-52 display- no
e) EaseIn speed- 2.1 seconds
h) operating mode- Intelix
v) monitor channel- none
u) Intelix strings....
l) string trigger channel- none
m) edit strings....
g) analogs to EaseIn | h) operating mode | i) Info | o) reload config.
p) Play a show | r) save config. | t) Test shows | x) eXit
Enter Command-
a) DMX-512: Please refer to the MultiShow section of this manual.
b) Baud Rate: While using the BR-SmartMedia in Intelix mode, the
secondary serial port can be set to any of the available baud
rates. Please refer to the MultiShow section of the manual for ad-
ditional information on this command.
c) Numbering System: Please refer to the MultiShow section of this
manual.
d) VT-52 Compatible Display: Please refer to the MultiShow section
of this manual.
e) Ease-In Speed: Please refer to the MultiShow section of this man-
ual.
h) Operating Mode: Please refer to the MultiShow section of this
manual.
G
ILDERFLUKE
& C
O
.• 205 S
OUTH
F
LOWER
S
TREET
• B
URBANK
, C
ALIFORNIA
91502 • 818/840-9484 • 800/776-5972 •
FAX
818/840-9485
E
AST
C
OAST
/F
LORIDA
O
FFICE
• 7041 G
RAND
N
ATIONAL
D
RIVE
• S
UITE
128d • O
RLANDO
, F
L
. 32819 • 407/354-5954 •
FAX
407/354-5955
59 of 81