Reese 30845 25K ELITE SERIES GOOSENECK - Manual (Page 9)

30845IN – 31OCT12D PCN18116 ©2005, 2012 CEQUENT PERFORMANCE PRODUCTS, INC. Litho in USA 9
For Kits 30845, 40845 & 50845
9. Rotate the Anchor Handles into the unlocked position (see Figure 14) and install the Signature Series
Gooseneck Hitch into the mounting pucks.
10. Rotate the anchor handles into the locked position and install the linch pins into the anchor handles. See
Figure 14.
If handles do not rotate into the locked position be sure there are not any obstructions in the mounting
pucks and that the
Signature Series Gooseneck Hitch’s anchor bushings line up and fit into the mounting
pucks.
If the anchor bushings do not line up with the mounting pucks, it may be necessary to uninstall the hitch
and repeat steps 4
– 6.
If the anchor bushings do line up with the mounting pucks and the handles still do not rotate into the
locked position, it may be necessary to loosen up the anchor tee pins. Remove
Signature Series Gooseneck
Hitch from truck bed, remove appropriate linch pin and rotate the anchor tee pin another ½ turn counter
clockwise. Do this until all 4 anchor handles rotate into the locked position. See Figure 14.
If the handles rotate into the locked position and have excessive vertical movement, it may be necessary
to tighten up the anchor tee pins. Remove
Signature Series Gooseneck Hitch from truck bed, remove
appropriate linch pin and rotate the anchor tee pin another ½ turn clockwise. Do this until all 4 anchor
handles rotate into the locked position. See Figure 14.
11. The Signature Series Gooseneck Hitch is now secure and unable to be lifted out of the truck unless the
handles are unpinned and rotated to the unlocked position.
12. Remove the linch pins and rotate the handles to the unlocked position. Remove the Signature Series
Gooseneck Hitch from the truck.
13. Follow instructions on primer container and apply to hitch in designated area. See Figure 15.
Fig. 15
Apply primer to this area
Apply primer to this area