Gentec-EO PC-Gentec-EO (for MAESTRO and INTEGRA) - Manual (Page 62)

PC-Gentec- EO User’s Manual Revision 5.0 61
This command is used to send the current value with frequency.
Text Command Parameters Return
CTU None Current value with frequency
Example (32
Hz laser)
Response from Monitor
Command: *CTU 5.066E-01,32.0
Get continuous value with frequency (Integra only)
The *CEU can be called send current value with frequency.
This command is used to send the current value with frequency.
Text Command Parameters Return
CEU None Continuous value with frequency
Example (32
Hz laser)
Response from Monitor
Command: *CTU 5.066E-01,32.0
8.1.3.2 Error Messages
# Error Comment
1 Command not found Command is invalid.