Gentec-EO PC-Gentec-EO (for MAESTRO and INTEGRA) - Manual (Page 49)

PC-Gentec- EO User’s Manual Revision 5.0 48
The value should be set between 0.1 and 99.9.
Example Response from Monitor
Text Command: *STL15.4 (15.4%)
*STL0.20 (.2%)
Get Trigger Level
This command returns the trigger level in %. The value is between 0.1% and 99.9%.
Text Command Parameters Return
GTL None Returns the trigger level
in %.
Example Response from Monitor
Command: *GTL Trigger Level : 2.0 \r\n
Get Mode Display
This command ret urns the MAESTRO’s power mode. Depeding on the head, it can be power
mode in W, power mode in dBm (DBM), energy mode in J, Single Shot Energy mode in J (SSE),
or simply no detector is connected to the MAESTRO.
Text Command Parameters Return
GMD None POWER = 0
ENERGY = 1
SSE = 2
DBM = 6
NO_DETECTOR = 7
Example Response from Monitor
Command: *GMD Mode : 0 \r\n
MEASUREMENT COMMANDS -- DATA ACQUISITION
Query Current Value
This command is used to query the value that is currently being displayed on t he device’s screen.
The value is displayed in watts or in joules.
Text Command Parameters Return
CVU None Current value