Gentec-EO PC-Gentec-EO (for MAESTRO and INTEGRA) - Manual (Page 61)

PC-Gentec- EO User’s Manual Revision 5.0 60
:0 0028 E1 20 á
:0 0029 0 3A :
:0 002A 39 31 1 9 Detector serial number (You must convert the
:0 002B 36 39 9 6 hexadecimal values in ASCII characters)
:0 002C 32 37 7 2
:0 002D 0 0 0000 = Null termination character
:0 002E D70A
0.0200
Trigger Level LSB (between 0.001 and 0.999)
:0 002F 3CA3 Trigger Level MSB (between 0.001 and 0.999)
:0 0030 0001 1 Is autoscale mode on? LSB
:0 0031 0000 0 Is autoscale mode on? MSB
:0 0032 0000 0 Is anticipation on? LSB
:0 0033 0000 0 Is anticipation on? MSB
:0 0034 0000 0 Is zero offset on? LSB
:0 0035 0000 0 Is zero offset on? MSB
:0 0036 0000
1.0000
Correction Multiplier LSB
:0 0037 3F80 Correction Multiplier MSB
:0 0038 0000
0.0000
Correction Offset LSB
:0 0039 0000
Correction Offset MSB
:1 0000 0000 0 End of structure
Noise suppression (Integra only)
Sets or Queries the sampling size of the noise suppression. For joulemeter and UM only.
Text Command Parameters Return
AVG### ###: average size none
Example Response from Monitor
Send avg016 sets sampling size to 16 pulses, Integra replies
Ok.
Valid averages are powers of 2 from 1 to 128. If a non valid
argument is sent, An Error is returned and the value is left
unchanged.
Get current value with frequency (Integra only)
The *CTU can be called send current value with frequency.