Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 48)

page 48
device with ID number 001 will only restore files from the \Loadtronic
\ID_001 directory.
Perform a backup:
1. Open Main Menu – Service – USB MEM Backup, refer chapter 2.1.
2. Select which files to backup: Logs, Database and/or System files, refer
Figure 5-4.
3. Press Enter/# to perform the backup.
Retrieve details:
1. Open Main Menu – Service – USB MEM Restore, refer chapter 2.1.
2. Select which files to restore: Database or System Files, refer Figure
5-5.
Note! To restore calibration data, enable the calibration switch, refer
Figure 1-1.
3. Press Enter/# to perform the restore function.
Figure 5-4 Backup.
Fairbanks Scales