Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 16)

page 16
3.3.2 Unspecified Recording
LOADTRONIC 3 allows the operator to perform an unspecified recording; a
recording of material weight without any specification of the material type,
truck, customer or location.
The operator can specify the target load before the job starts; either to set the
maximum permitted load limit for the truck or hauler, or to set a pre-defined
amount of material requested by the customer, refer Figure 3-4.
After each weighing LOADTRONIC 3 will display the weight of the current
bucket, the running total weight and the remaining weight to be loaded, refer
Figure 3-3.
If the operator does not specify the target load for the job, the field for the
remaining weight will be blank. The current weight of the bucket and the
running total weight will be displayed.
Figure 3-3 Job record with specified target load.
Fairbanks Scales