Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 12)

page 12
The weight of the bucket is automatically added to the running total weight.
During automatic weighing the display unit shows, refer Figure 3-2:
x Load of the current bucket (Material weight), e.g. 5.15 t.
x Rest (Remaining material to be loaded (the required final weight -
(minus) total load so far).
x Running Total weight loaded so far, e.g. 17.00 t.
x Number of buckets loaded so far, e.g. 3.
x Attachment: ID number of the current attachment.
x Number of Active Jobs.
x Active Job (details).
Figure 3-1 Automatic Weighing is connected to the normal working cycle. A: 2 seconds. B:
measurement area -20
q to +20q. C: weighing.
Fairbanks Scales