Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 20)

page 20
Job record 1-9 can be active jobs. A job becomes active once the first bucket
of material is delivered; the operator can easily see that a job is active since
the running total is different from zero.
An active job is accessed by pressing the job record number (1-9) on the
keypad.
Note! A job is active until the operator presses the function key Print/F2,
or C/F1.
3.4 Manual Weighing
Weighing can be activated manually:
x Press # to activate manual weighing. The machine does not have to be
moved.
x Raise the bucket evenly from below the horizontal level. The load is now
weighed.
x The running total weigh is updated as the bucket is dumped.
Figure 3-6 Open Main Menu – Setup – Parameter Setup II to set the maximum number of active
jobs.
Fairbanks Scales