Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 40)

page 40
4.2.2 Total Load Report
The default setting is to make a report of the total weight loaded during a
certain time period without specifying Customers, Material, Truck or
Location. An example of such a report is given in Figure 4-9.
Procedure to build a total load report:
1. Open Main Menu - Reports, refer chapter 2.1.
2. Set the time period: The default date is the current date in both the
‘Date From’-field and the To-field. Press the arrows to set the ‘From’
Figure 4-8 Edit the report header.
Figure 4-9 Example of the total load delivered by the wheel loader.
Fairbanks Scales