Fairbanks LoadTronic 3 - Loader Weighing System - Manual (Page 41)

OPERATOR’S MANUAL page 41
date. Press and hold the arrow to step one month at a time. Press
Next/F4 to highlight the ‘To’ date, and the arrows to set the correct
date.
3. The default report type is Total. Press Select/# to view the total weight
loaded, refer Figure 4-10.
4. Press Print/F2 to print the report (requires a printer).
4.2.3 Specified Report
You can specify the report based on one or more of the following criteria:
Customer, Material, Truck and Location. An example of such a report is
given in Figure 4-11, illustrating that customer John Smith has received 4
different types of material. The report also presents the weight of the
material, and the total weight delivered based on the specification.
Figure 4-10 Generate the report shown in Figure 4-9.