Fairbanks 2000 SERIES Rocker Column Railroad Scale - Manual (Page 35)

03/10 35 50614 Rev. 5
Appendix I: Recommended Tools & Equipment:
Local RailRoad Approval
Certified Prints
Service manuals for ALL equipment being installed.
Lifting Device capable of safely lifting 5000 lbs or more
Laser or Contractor's level (Transit)
Hand Tools
Mason Line
25 Foot tape measure
100 Foot tape measure
Precision Level (Starrette Model 98 Mechanics Level, 6 inch long model)
Torque wrench of suitable capacity
Thread file; Standard thread sizes of 10, 8, 7, 6.
Electric drill / with bits / variable / 1/2" Chuck size
Wood hand saw
Claw hammer
5 Gallon buckets, with handles
Large and small trowels
3/4" Socket set
36" Crow bar
24" Crow bar
Long handled sledge hammer
2 Foot level, general purpose
20 Ton Capacity Port a Power Style Jack. Ram no higher than 6".
Wire brushes
5 pounds of grease NLGI #2, Water resistant, Anti-wear Grease such as CRC Super White.
Anti-Seize
Caulk gun w/caulking
Appendix II: Required at the Jobsite:
117 VAC Electric Power (Extension cords as needed)
Water
Suitable crane(s)
Rigging (I.E. Straps, 4 leg drops, etc.)
NOTE: The weight capacity of all lifting and rigging equipment must be suitable for their
intended use.