Fairbanks 2000 SERIES Rocker Column Railroad Scale - Manual (Page 15)

03/10 15 50614 Rev. 5
2-E: Recommended Installation Sequence:
After pit is completed, follow this sequence:
Measure pit squareness, depth, width, and length against certified prints
Measure cast-in anchors, pier elevation on all piers against certified prints
Dimensions MUST be correct before installing scale hardware
Using packing list, be sure all scale elements/parts have arrived intact and Undamaged
Then install:
Grout plates
Checking brackets
Scale modules and associated hardware
Loadcells, Bearings, and associated hardware
Adjustments and leveling
Forming and grouting Grout plates
Grout Plate Assemblies
Checking brackets
Scale modules and associated hardware
Loadcells, Bearings, and associated hardware
Adjustments and leveling
Forming and grouting Grout plates
Check bracket adjustment
Grounding
Rail and anti-creep devices
Complete wiring of load cells
Instrumentation and any peripheral equipment
Calibration and testing