E-Mon E50-6003200R*KIT - Manual (Page 8)

CLASS 5000 METER
62-0392-03 8
2.3 Input Board
The Class 5000 meter is supplied with an input board which allows it to accept pulses
(dry contact) from third party meters, such as gas, water, BTU, etc.
Fig. 4. Input Board.
The input terminals are used by the Class 5000 meter. The output terminals are not.
Connect metering devices with “dry contacts” only. If the contacts are from solid - state
(electronic) sources, polarity must be observed for proper operation.
M33272
INPUT TERMINALS
CL5000 METER INPUT BOARD
INP1
+ + + +
INP2 OUT1 OUT2