E-Mon E50-6003200R*KIT - Manual (Page 43)

CLASS 5000 METER
43 62-0392-03
10.3.3 IP Setting Display Screen
To Change the IP settings, complete the following steps:
1. Press the MENU button.
2. The following screen will appear:
3. Use UP or DOWN button until the arrow is on the IP Setting line.
4. Press the SELECT button. The IP Setting Screen will appear.
5. Use UP or DOWN button to make changes, press the SELECT button to
advance to the next setting. Repeat this step until all the settings have been
updated.
6. If changes were made, you’ll be asked to save, press UP or DOWN to select Y or
N.
7. Press SELECT to save new settings. This will also return you to main menu. In
main menu, select EXIT to get out of programming mode and return to normal
display mode.
—> DATE & TIME
DEVICE ID
IP SETTINGS
RESET KW/KWH READ
DATE & TIME
DEVICE ID
—> IP SETTINGS
RESET KW/KWH READ
ENABLE DHCP? N
IP: 192.168. 0.168
MSK: 255.255.255 0
GWY: 192.168. 0. 1
Save changes: Y / N