E-Mon E50-6003200R*KIT - Manual (Page 41)

CLASS 5000 METER
41 62-0392-03
10.3.1 Date & Time Display Screen
To change the date and time, complete the following steps:
1. Press the MENU button.
2. The following screen will appear:
3. Press the SELECT button. The Date and Time Screen will appear, and the 2
digit month will be blinking.
4. Use UP or DOWN button to make changes, press the SELECT button to
advance to the next setting. Repeat this step until all the date and time settings
have been updated.
5. If changes were made, you’ll be asked to save, press UP or DOWN to select Y or
N.
6. Press SELECT to save new settings. This will also return you to main menu. In
main menu, select EXIT to get out of programming mode and return to normal
display mode.
—> DATE & TIME
DEVICE ID
IP SETTINGS
RESET KW/KWH READ
DATE: 02-16-2012
TIME: 01:57:36
Save changes: Y / N