E-Mon E50-6003200R*KIT - Manual (Page 40)

CLASS 5000 METER
62-0392-03 40
Fig. 23. Push Buttons.
10.3 How to Program the Display Screens
The display information can be programed using four push buttons switches. The push
buttons (DOWN, UP, SELECT, MENU) are located at the top of the display board on
the inside front door of the meter. The buttons are used to program the following:
• Date & Time (This field sets the month, day, year, and time).
• Device ID (This field changes the default setting, which is 1A for EZ7 and 2 for
ModBus).
• IP Settings (This field allows you to select the DHCP or static IP address, mask and
gateway information).
• Reset KW/KWH Read (This field resets the Peak kW Demand to zero).
M33279
DOWN
UP SELECT
MENU