Teledyne 6700-C Total Organic Carbon Analyzer (Hi-Temp Combustion version) - Manual (Page 47)

High Temperature Combustion Maintenance
Teledyne Analytical Instruments 47
5.3.3 Master Interface Board
(P/N B718 & P/N B717)
The Master Control Panel has no field adjustment. If
malfunctioning, exchange modules by using the following instructions.
See Figure 5-2.
Figure 5-2: Removing the Master Interface Board Assembly
Procedure:
1. Turn off power.
2. Remove plastic cover.
3. Disconnect connectors.
4. Remove panel.
5.3.4 D.C. Power Supply
(P/N P1506)
The power supply has no field adjustment. If malfunctioning,
replace the module (P/N P1506) using the directions below. Refer to
Figure 5-3.
Procedure:
1. Turn off power.
2. Remove plastic cover.