Teledyne 6700-C Total Organic Carbon Analyzer (Hi-Temp Combustion version) - Manual (Page 37)

High Temperature Combustion Operation
Teledyne Analytical Instruments 37
Select [Liquid]. The following screen appears:
Select “ZERO”. D. I. water is automatically introduced to the
analyzer. The user will be notified upon completion.
Select the span solution value, and press [Span] to introduce the
solution and then select [SPAN]. If the calibration is acceptable, select
[OK] or [CANCEL] if not acceptable.
The analyzer is now calibrated and ready to run samples.
4.5 Chart
Historical Data may be obtained from the Chart menu. The
following data can be edited or recalled:
 Scale – set the scale for the screen
 Last 24 hours – Review of data taken within the last 24 hours
 Historical Data – Recall archived data
To enter the menu, select [Chart] from the screen. The following
menu will appear.