beautypg.com

3 system self diagnostic test – Teledyne 3010MA - Paramagnetic oxygen analyzer, includes 0-100% range User Manual

Page 60

background image

Part 1 Control Unit

Model 3010MA

60

Teledyne Analytical Instruments

2. To change between American and European fuses, remove the

single retaining screw, flip Fuse Block over 180 degrees, and
replace screw.

3. Replace fuse as shown in Figure 5-2.

4. Reassemble Housing as shown in Figure 5-1.

American Fuses

European Fuses

Figure 5-2: Installing Fuses

5.3 System Self Diagnostic Test

1. Press the System button to enter the system mode.

2. Use the < > arrow keys to move to More, and press Enter.

3. Use the < > arrow keys to move to Self-Test, and press Enter.

The following failure codes apply:

Table 5-1: Self-Test Failure Codes

Power

0 OK

1

5 V Failure

2

15 V Failure

3 Both

failed

Analog

0 OK

1

D/A A (0-1 V Concentration)

2

D/A B (0-1 V Range ID)

3 Both

Failed