Bosch MUZXLPP1 PastaPassion Pour les fans de pâtes le kit PastaPassion est composé dun accessoire à lasagnes dun accessoire à tagliatelles et dun adaptateur. - Manual (Page 6)

6 Robert Bosch Hausgeräte GmbH
For your safety
This accessory is designed for the food processor MUM8.../MUMXL.. .
Follow the operating instructions for the food processor.
The pasta attachment MUZ8NV1 is suitable for shaping dough
sheets from prepared dough. The pasta attachments MUZ8NV2
and MUZ8NV3 are used to process the dough sheets, prepared
with the pasta attachment MUZ8NV1, into ribbon noodles.
Any other use is not permitted.
, Safety instructions for this appliance
Risk of injury
While working, do not place fingers between the rollers and do not
insert any objects between the rollers.
Use the accessories in the indicated operating position only.
The accessories must be completely assembled before use.
Do not remove/attach accessories until the drive has stopped.
Important!
An adapter is always required to attach the pasta attachments.
The adapter is available from a specialist outlet as an individual part
(MUZ8AD1) or in a set with the mincer (MUZ8FW1).
Overview
The instructions for use apply to different
models. Each model can be purchased
individually in the shops.
Please fold out the illustrated pages.
Fig. 
1 MUZ8NV1
Professional pasta attachment for dough
sheets (lasagne)
2 MUZ8NV2
Professional pasta attachment for wide
noodles
3 MUZ8NV3
Professional pasta attachment for fine
noodles
Fig. 
1 Selection button (for MUZ8NV1 only)
2 Pasta attachment
3 Foot
4 Pasta adapter
5 Locking lever
6 Rollers
Fig. 
Operating position
Fig. 
Adapter MUZ8AD1
Operation
 Before using for the first time, thoroughly
clean pasta attachments, see “Cleaning
and care”.
en
Important information
In these instructions for use the recom-
mended reference values for the
operating speed refer to appliances with a
7-setting rotary switch.
For appliances with a 4-step rotary
switch the guide values can be found
in the following table:
7 settings: 1...2...3...4...5...6...7
4 settings: 1........2........3........4