Alliance Laundry Systems UF35PV - Manual (Page 79)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming
77 F232059
NOTE: The cycle shown is intended for setup of
supplies with a 5-supply system. If the machine is
equipped with 8 supplies, refer to Programming a
Supply Step – Models with 8 Supplies. As extra
supplies are normally controlled by bank 2,
program supplies 6, 7, 8, and 9.
Cycle 38
Formulas Common to All Markets
(ReWash/reclaim)
Step Description Min:sec
1 130°F (54°C) Fill to High Level 5:00
2 Wash 1 2:00
3 Drain 1 1:00
4 Hot Fill to Low Level 5:00
5 Supply 1 and 2 (Display: “SA”) 0:45
6 Wash 1 4:00
7 Drain 1 1:00
8 Hot Fill to Low Level 5:00
9 Supply 1 and 2 (Display: “SA”) 0:45
10 Wash 1 7:00
11 Drain 1 1:00
12 Hot Fill to High Level 5:00
13 Wash 1 4:00
14 Drain 1 1:00
15 Medium Spin 1:00
16 Warm Fill to Low Level 5:00
17 Wash 1 2:00
18 Drain 1 1:00
19 110°F (43°C) Fill to High Level 5:00
20 Wash 1 2:00
21 Drain 1 1:00
22 110°F (43°C) Fill to Low Level 5:00
23 Supply 3 and 4 (Display: “SI”) 0:30
24 Wash 1 4:00
25 Drain 1 1:00
26 High Spin 3 (SDLY 0:45) 4:00
Cycle 39
Formulas Common to All Markets
(Chemical Supply Setup)
Step Description Min:sec
1 Warm Fill to Low Level 5:00
2 Supply 1 2:00
3 Supply 2 2:00
4 Supply 3 2:00
5 Supply 4 2:00
6 Supply 5 2:00
7 Wash 1 0:30
8 Drain 1 1:00