Alliance Laundry Systems UF35PV - Manual (Page 18)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
F232059 16
Table 1 lists the various displays and what they mean.
The operator should become familiar with these
computer displays. The last digit represents version number.
Table 1
Display Interpretations
Display Meaning Display Meaning
FRWC00 Program identification code (ROM). CY Cycle number
D1 Drain #1
Error Messages Da Drain to optional reuse tank A
FILL Fill problem Db Drain to optional reuse tank B
EMTY Empty problem DONE End of cycle
TEMP Over-temperature-limit condition EXISTS Cycle already in memory
ME Cycle information problem EDIT? Do you want to edit the cycle?
WATER Water in washer-extractor at end of cycle F Heat select temperature in ° Fahrenheit
DOOR Door not locked problem C Heat select temperature in ° Centigrade
OVERHT Open or shorted temperature input circuit or
temperature out of computer’s allowable
limits HH Hot fill to high level
HL Hot fill to low level
aL Fill from reuse tank A to low level HM Hot fill to medium level
aM Fill from reuse tank A to medium level HO Hot fill to overflow
aH Fill from reuse tank A to high level HT Heat (steam or electric)
bL Fill from reuse tank B to low level H1 High speed #1
bM Fill from reuse tank B to medium level H2 High speed #2
bH Fill from reuse tank B to high level H3 High speed #3
A1 Auxiliary output #1 MS Medium speed spin
A2 Auxiliary output #2 --M Minutes (used when programming time)
A3 Signal --S Seconds (used when programming time)
CH Cold fill to high level NCYC Cycle not available
CM Cold fill to medium level NEXT Select cycle or open door or select program
CL Cold fill to low level SDLY Spin coast delay
CO Cold fill to overflow SK Soak