Luminex FLEXMAP 3D Hardware User Manual - Manual (Page 20)

FIGURE 7. Installed FLEXMAP 3D System
Disposal of Instrument
Within the European Union, the Waste Electrical and Electronic Equipment Directive
2002/96/EC requires that you properly dispose of electrical and electronic equipment
when it reaches its end of life.
If you are disposing of a Luminex ® FLEXMAP 3D ® instrument, decontaminate the system.
See the section titled “ Decontamination Procedure ”. Next, contact Luminex Technical
Support for a Return Material Authorization (RMA) number at +1-512-381-4397 (outside of
the U.S.). Return the equipment to the following Luminex location:
Luminex Corporation
12201 Technology Blvd., Suite 130
Austin, Texas 78727
USA
For information about disposal of FLEXMAP 3D outside of the European Union, contact
Luminex Technical Support at 1-877-785-2323 within the US and at +1-512-381-4397 outside
of the US.
For information about disposal of the barcode scanner, PC, or monitor, refer to the
manufacturer documentation.
Safety
9