Luminex FLEXMAP 3D Hardware User Manual - Manual (Page 17)

salts” (Centers for Disease Control, Atlanta, Georgia, April 30,
1976).
Biological Samples
Human and animal samples may contain biohazardous infectious agents. Where exposure
to potentially biohazardous materia exists, follow appropriate biosafety procedures and use
personal protective equipment (PPE). PPE includes gloves, gowns, laboratory coats, face
shields or mask and eye protection, respirators, and ventilation devices. Observe all local,
state, federal and country specific biohazard handling regulations when disposing of
biohazardous waste material.
Mechanical Components
The FLEXMAP 3D instrument has parts that move during operation. Risk of personal
injury is present. The moving parts present puncture, pinching, and hand-crushing
hazards. Keep your hands and fingers away from the XY slot, syringe pumps, and
sample probe during operation. The XY platform ejects without warning, especially
during multiplate batches. Observe all warnings and cautions. Keep the access doors
closed during normal operations.
Swivel Base
The optional swivel base available with the FLEXMAP 3D system includes moving parts
and possible pinch points. Those factors present the possibility of injury.
Make certain the swivel base rests securely on a stable surface, to avoid any possibility of
toppling.
Indicator Lights
The lights inside the front door of the Luminex ® FLEXMAP 3D ® instrument indicate the on/off
status of the system and are harmless. The blue light-emitting diodes (LEDs) do not emit light
in the UV spectrum.
FLEXMAP 3D ® Hardware User Manual
6