Luminex FLEXMAP 3D Hardware User Manual - Manual (Page 13)

Symbols
You may encounter these symbols during the use and operation of the Luminex ® FLEXMAP
3D ® system. They represent warnings, conditions, identifications, instructions, and regulatory
agencies. Warning symbols are further explained in the Safety Precautions section.
Symbol Description Symbol Description Symbol Description
Puncture/Pinch
Point Warning General
Warning,
Caution, Risk
of Danger Warning,
Biological
Hazard
Hand Crush/
Cut/Force
From Above Heat/Hot
Surface
Warning Burn Hazard/
Hot Surface
Caution, Risk
of Electric
Shock Warning, Laser
Beam Consult
Instructions for
Use
Protective
ground Alternating
current (AC) Catalog
Number
Use By
Expiration Date Temperature
Limitation Waste
Electrical and
Electronic
Equipment
(WEEE)
Date of
Manufacture Manufacturer European
Union
Conformity
Off (Power) On (Power) MET Mark
Serial Number Batch Code European
Representative
In vitro Medical
Diagnostic
Device
1
1 The FLEXMAP 3D system is for research use only and is not for use in diagnostic procedures within the
US. The system has not been cleared or approved for clinical use by the US FDA.
FLEXMAP 3D ® Hardware User Manual
2