Magnum Venus Plastech ADVANTAGE - Manual (Page 26)

Advantage Gelcoater
arm bearing (see Figure 22).
Unlock the gun trigger.
Place an appropriate empty container under the gun-head.
Press the flush button on the side of the gun to flush the gun head.
NOTE
Gun trigger must be closed before flushing.
CAUTION
If the container is not empty, solvent will splash out of
the container when you flush the system.
Figure 20: Lean the Catalyst Pump
Toward the Resin Pump Figure 21: Hand Prime the Catalyst Pump
22
NOTE
To monitor catalyst flow, use the float in the catalyst
jug’s sight tube. The float rises and falls with each
cycle of the catalyst pump.