beautypg.com

Magnum Venus Plastech ADVANTAGE User Manual

Page 18

background image

Advantage Gelcoater

Inspect hose fittings and seals for leaks.

Make sure all hose connections are tight.

Check Fittings and Assemblies

Check the resin accumulator to be sure threads are hand-tight.

Check pick-up wand fittings to be sure fittings are tight (use 14” pipe
wrenches)(strap wrench preferred).

Lubricate Resin Pump

Fill the pump body reservoir at the base of the pump shaft 2/3 full of SAE
30-weight motor oil (must be non-detergent.

Tighten Gun Packing Before Priming.

Figure 10: Lubricate the Resin Pump

14