Magnum Venus Plastech ADVANTAGE - Manual (Page 20)

Advantage Gelcoater 16
Figure 14: Connect Main Air Supply
Fill Flush Tank
Release any pressure in the flush tank by gently pulling upwards on the
lever attached to the pressure relief valve (see Figure 15).
Open the lid by pulling up the hatch lock, turning the hatch sideways, and
lifting the hatch out of the tank (see Figure 16).
Check the flush tank for dirt or debris. Wipe with a clean rag if
necessary.
Fill the tank with clean solvent.
Reinstall the tank hatch.
NOTE
Do not drop the flush tank hatch into the tank.
CAUTION
Be sure the pressure relief valve is completely closed
and the lever is in a horizontal position.