Controlled Products Systems Group PAT1AC - Manual (Page 37)

35
Types of Accessories
USAutomatic Patriot control boards are designed to operate with all accessories. Understanding the control board
inputs and the desired operation of each accessory is essential when designing the gate operator system. Solar
friendly accessories are essential in designing a proper solar gate operator. Contact USAutomatic for information
on recommended solar friendly accessories for your solar gate operator.
Safety Accessories
(Primarily used to keep gate from operating when
an object is in the gate path)
Safety Loops, Photo Eyes and/or Motion Detectors
Secondary Entrapment Accessories
(Primarily used to protect people from becoming
trapped in and around the gate area)
Contact Edge (wireless), Contact Edge (wired) and/or
Photo Eyes
Convenience Accessories
Keypads, Free Exit Device Magnetic Sensor, Free Exit
Device Photo Eye, Card Reader, Single Button Station ,
Key Switch, Seven-Day Timer and/or Long Range
Receiver and Transmitter
Security Accessories
Magnetic Lock, Solenoid Lock, Stone Lock, Perimeter
Security and/or Proximity Sensor
Other Accessories
3 Button Station, Gate Open Indicator, Gate In Motion
Indicator Visual, and/or Gate In Motion Indicator Audible
Accessory Wiring
The +12 vdc output is protected with a 1.5 amp auto-resetting fuse.
Solenoid Lock – This is a +12 vdc output that can output +12 volts two different ways.
1. If DS2 switch 1 is turned “on” and DS1 switch 5 is “OFF,” the +12 vdc will come on a half second before
the gate begins to open after activation. Once the gate begins to move, the output will go to 0 volts in 4
seconds.
2. The other option is to turn DS2 switch 1 and DS1 switch 5 on. With this setting the solenoid lock output
will be +12 vdc a half second before the gate begins to move and remain at +12 vdc until 3 seconds after
the gate has stopped on a limit. For example, this can be used to turn on a gate in motion siren or light.
Magnetic Lock – This is a +12 vdc output.
Whenever the gate reaches the closed limit the +12 vdc will be present and remain until the gate is
activated to open. The +12 vdc output will be turned “off” one half second before the gate begins to open.