Controlled Products Systems Group 9150-080 - Manual (Page 4)

9150-065-S-9-11 2
SPECIFICATIONS 1
ASTM 2200 Standard for Gate Construction
Important Safety Instructions
Instructions regarding intended installation:
Important Notices
UL325 Entrapment Protection
Glossary
Slide Gate Requirements
Slide Gate Protection
4
4
4
5
6
7
8
9
SECTION 1 - INSTALLATION 10
10
10
11
12-15
15
16
17
18
19
1.1 Hardware for the Gate
1.2 Physical Stops for the Gate
1.3 Types of Gates
1.4 Operator Mounting Positions
1.5 Underground Conduit Requirements
1.6 Pad, Post or Ceiling Mount without / with J-Box Setup
1.7 Mounting Operator and Chain
1.8 Installation of Warning Signs
1.9 Chain Tray Kit
SECTION 2 - AC POWER TO OPERATOR(S) 20
20
21
2.1 High Voltage Wire Runs
2.2 High Voltage Terminal Connection
SECTION 3 - ADJUSTMENTS 22
3.1 4602 Circuit Board Description and Adjustments
3.2 DIP-Switch SW 1 and SW 2 Settings
3.3 Automatic Open / Close Limit Adjustment
3.4 Clutch Adjustment
3.5 Inherent Reverse Sensor Adjustment
22
23-24
25
26
26
TABLE OF CONTENTS