beautypg.com

Specifications – Controlled Products Systems Group 9150-080 User Manual

Page 3

background image

9150-065-S-9-11

1

WARNING

MOVING GATE CAN CAUSE

Operate gate only when gate area is in sight
and free of people and obstructions.

Do not allow children to play in gate area
or operate gate.

Do not stand in gate path or walk through
path while gate is moving.

Read owner’s manual and safety instructions.

SERIOUS INJURY OR DEATH

CLASS

CERTIFIED TO

CAN/CSA C22.2 NO. 247

CONFORMS TO

ANSI/UL-325

VEHICULAR GATE OPERATOR

HP

53382

MODEL

SERIAL

VOLTS

PHASE

AMPS

60 Hz

MAX GATE LOAD

DoorKing, Inc., Inglewood, CA

15.25”

16.75”

17.75”

24.75”

Gate Frame

Class of Operation

Model 9150 - UL 325 Class I, II, III, IV

Type of Gate

Vehicular Slide Gates Only

Drive Sprocket Size #40

Chain

Cycles Per Hour

60 Per Hour (Installed level).

Speed

Approximately 1 Ft. per Second (Installed level).

Entrapment Protection

Primary - Inherent entrapment sensing system (Type A)

Secondary - Provision for connection of a non-contact sensor (Type B1)

and/or a contact sensor (Type B2).

DoorKing, Inc. reserves the right to make changes in the products described in this manual without notice and without obligation of DoorKing, Inc. to notify any
persons of any such revisions or changes. Additionally, DoorKing, Inc. makes no representations or warranties with respect to this manual. This manual is
copyrighted, all rights reserved. No portion of this manual may be copied, reproduced, translated, or reduced to any electronic medium without prior written
consent from DoorKing, Inc.

SPECIFICATIONS

4” Minimum

1” Minimum

10.5”

Use this manual for the Model 9150 operator with circuit board 4602-010 Rev A or higher ONLY.

Chain Height:
Idler wheels in
top position.

Concrete

Pad

Concrete
Pad

WITH Convenience Open

Max. Gate Weight

Installed Level

WITHOUT Convenience Open

Max. Gate Weight

Installed Level

Amp

Horsepower - Voltage - Phase

Max Gate Length

Installed Level

1/2 HP - 115 VAC Single-Phase

1/2 HP - 208/230 VAC Three-Phase

1/2 HP - 460 VAC Three-Phase

1 HP - 115 VAC Single-Phase

1 HP - 208/230 VAC Three-Phase

1 HP - 460 VAC Three-Phase

1,000 Lbs.

1,000 Lbs.

1,000 Lbs.

1,500 Lbs.

1,500 Lbs.

1,500 Lbs.

800 Lbs.

800 Lbs.

800 Lbs.

1,300 Lbs.

1,300 Lbs.

1,300 Lbs.

30 Ft.

30 Ft.

30 Ft.

45 Ft.

45 Ft.

45 Ft.

5.4

2.8

1.35

9.7

5.0

2.5

This manual is related to the following products: