4 main terminal description – Controlled Products Systems Group 4302-111 User Manual
Page 14
4302-065-F-1-13
12
1
2
3
4
5
6
7 8
9 10 11 12 13 14 15 16 17 18 19 20
1.4 Main Terminal Description
Operation of the relay is dependent on the setting
of SW 2, switches 1 and 2. Relay contact can be
set for Normally Open (NO) or Normally Closed
(NC) operation.
Contact rating is 1 amp
maximum at 24 Volts.
•
SW 2, Switch 1 OFF, Switch 2 OFF:
Relay activates when gate is OPEN.
•
SW 2, Switch 1 OFF, Switch 2 ON:
Relay activates when gate is OPEN, OPENING or CLOSING.
•
SW 2, Switch 1 ON, Switch 2 OFF:
Relay activates when gate is OPEN or OPENING.
•
SW 2, Switch 1 ON, Switch 2 ON:
Relay activates when gate is OPENING or CLOSING.
NO
NC
Maglock: SW 2,
Switch 3 ON, 1 sec.
delay at start.
SW 1
•
When gate is closed, input will open gate.
•
When gate is open and auto close
timer SW 1, switch 4 is turned ON,
input will re-set and hold timer.
•
When gate is open and auto close
timer SW 1, switch 4 is turned OFF,
input will close gate.
•
When gate is closing, input will
reverse gate.
•
SW 1, switch 3 is ON, terminal #4
functions as a normal FULL open input
(Normal Setting).
•
SW 1, switch 3 is OFF, terminal #4
becomes the output from a plug-in loop
detector installed in the EXIT loop port
of the circuit board.
•
When gate is closed, this input has no
affect on the gate operator.
•
When gate is open and auto close
timer SW 1, switch 4 is turned ON,
input will re-set and hold timer.
•
When gate is open and auto close
timer SW 1, switch 4 is turned OFF,
input will prevent gate from closing.
•
When gate is closing, input will
reverse gate when SW 1, switch 5
is OFF.
•
SW 1, switch 5 ON is NOT used.
4
8
2
15
12
10
11
DC power is not present on the
board until first initial cycle of gate.
1
ON
2
3
4
5
6
7
8
SW 1
1
ON
2
3
4
5
6
7
8
SW 1
1
ON
2
3
4
5
6
7
8
SW 1
1
ON
2
3
4
5
6
7
8
SW 2
1
ON
2
3
4
SW 2
1
ON
2
3
4
Low V
o
ltage Common
Low V
o
ltage Common
For specific wiring information, see next page.
Low V
o
ltage Common
Low V
o
ltage Common
Dr
y Relay Contact
Alarm Reset
Dr
y Relay Contact
24 VDC - 250 ma max.
Full Open
Full Open
Full Open
Standard Reverse
Not Used
Not Used
DC Lock Power Common
24 VDC Maglock Power
12 V
o
lt Batter
y
Low V
o
ltage Common
24 V
AC Input
24 V
AC Input