Hach-Lange PHOSPHAX indoor sc - Manual (Page 68)

68
Plumbing and connection options
A.5 Option 1 plumbing and connections
Option 1 is used with an sc analyzer and the Filter Probe sc. The
waste from the analyzer is discharged back into the basin using the
Filtration Kit. Use the drain tube inside the Filter Probe sc or the
optional heated drain tube to discharge the waste stream from the
sc analyzer.
Refer to Figure 27 and the following instructions for Option 1:
1. Install the Filter Probe sc into the sample stream. Refer to the
Filter Probe sc User Manual for more information.
2. Feed the Filter Probe sc hose (sample lines, electrical cables
and drain tube) through the analyzer opening ( Figure 27 ,
item 5). Use Seal Plug #2 to secure.
3. Seal the unused openings with Seal Plug #3.
4. Connect the Filter Probe sc data cable and power connections.
Refer to section 3.5.4, page 26 .
5. Connect the air tube to the compressor (item 3).
6. Connect the drain tube to the Filter Probe sc.
7. Connect the sample line to the sample inlet on the overflow
vessel using the fittings.